Check the Allow other users to connect through this computer's Internet connection box, and also select Local area connection in the Home networking connection list. This should make your laptop to work as a Wi-Fi access point. Connect to it, as usual, entering the password you have set up, and your device should now be connected to the Internet via the laptop.
Pretty neat, huh? User rating: 4. Read more Well, it all should work well in theory. In practice, though, we discovered that not all is smooth. If you connected a device to MyLaptopWiFi , but there is no connection to the Internet on that device, try to restart the laptop, and repeat the steps above again, it may work better the second time. Or, it appears that enabling the access point may not work well with the power transitions of your laptop. That is, if you try to put the laptop to sleep, it may not work and the laptop may stay awake while the access point is enabled.
We also experienced a few blue screen crashes, although not that frequently to make it a real concern. It may depend on the model of your laptop or the Wi-Fi card that your laptop has; some combinations may work better than others. Keep in mind, that if you put your laptop to sleep or restart it, the access point disappears and you would need to set it up again each time you wake up the laptop.
If you do this frequently and don't want to go through the same steps every time, you may want to use Windows Task Scheduler to do it for you. For example, put the two commands shown above in a batch file, and then create a new task that would run that batch file, and set the trigger for that task On workstation unlock. This way, every time you wake up the laptop and unlock it, the batch file would run for you automatically. When you no longer need it, disable the task in Task Scheduler.
We also found that sometimes an attempt to create the access point fails with Windows displaying the following message:. Encrypt and password-protect files with Encryptability encryption software for Windows 11,10,8. If this happens, it could be because the hosted network adapter got disabled for some reason. To solve this problem, open Device Manager, navigate to Network adapters , right-click Microsoft Hosted Network device, and choose to enable it.
If you don't see it in Device Manager, restart the laptop. We use cookies to make wikiHow great. By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article methods. Related Articles. Method 1.
Note that if buying a router, all routers are compatible with Windows XP. It is wireless adapters that have varying levels of Windows XP compatibility. If your router isn't new, then turn it on and skip to "Detecting your wireless adapter" below.
Plug your router into your internet socket if you want to share your internet. Enter your username and password from your router often "admin" and "admin" then your internet service provider. Method 2. Your wireless adapter should be detected automatically by Windows XP. Method 3. If your connection appears in the Wireless Connection Manager then connect to it, otherwise run the wizard.
This is the password that you've set up on your router for people to connect and access the Internet. Yes No. In the same window, the list of devices that are connected to your WiFi hotspot is displayed. As you can see, up to 8 devices can be connected to the access point on Windows 10 at the same time.
After that, restart your computer and try to turn on the mobile hotspot again. Just try to restart your Internet connection. Most likely there are problems with your internet connection no network , so you need to check the connection. Also this error appears in case you are connected to the provider through PPPoE, this type of connection is not supported by the Windows 10 mobile hotspot.
You can create a virtual Wi-Fi hotspot in Windows using command prompt. Run the command prompt with the Administrator privileges and execute the command:. The user passphrase of the hosted network has been successfully changed. This command will create a new virtual Wi-Fi adapter in the system Microsoft Wi-Fi Direct Virtual Adapter , which will be used by other wireless devices as a hotspot.
Now, enable the created virtual adapter:. A new wireless connection named Hotspot will appear in Network and Sharing Center. Now, other Wi-Fi devices can see and connect to this access point. Devices connected to such a network can share documents and hardware peripherals, but the Internet access through such WiFi hotspot is still impossible.
Now you need to allow to use a wired network connection to access the Internet for all devices connected to the Wi-Fi virtual access point. To do it, in Network and Sharing Center click the name of the network adapter, which provides the Internet connection. In our example, it is connection Ethernet. In the network adapter properties window you must share your Internet connection.
Go to Sharing tab in the Ethernet Properties window. Save the changes. Now all the devices that are connected to the created hotspot on Windows 10 can access the Internet through the external network interface of the computer. Try to connect to your hotspot from your phone, tablet or other laptop. The current settings for the Wi-Fi access point you have created can be viewed using the command:.
The command displays the network name SSID , supported authentication and encryption types, the maximum number of devices that can simultaneously use this hotspot Max number of clients and the current number of connected clients Number of clients.
The following command displays the various security settings for your Wi-Fi hotspot and connection keys:. Make sure that your Wi-Fi adapter is turned on. After that run Device Manager , select Show hidden devices in the View menu. To stop an access point, run the command: netsh wlan stop hostednetwork. Also, try to restart Internet Connection Sharing ICS service, or disable and re-enable the adapter through which your Windows 10 computer is connected to the Internet.
This is the best instruction on the issue I have found, and it worked splendidly. However, after using this for three weeks for so, for some reason it has stopped working. This issue has been confirmed on two other devices. Every time I make an access point using these instructions, a connection can be established but no data is being moved — even though these instructions did work well for a couple of weeks.
Any idea how so solve this issue? But I want to create a Hidden ssid so its not visible to all.
0コメント